Electromechanical Coupling Optimization Design of Reflector Antennas including Feed Position Error

FONT face; Verdana; LI Peng; ZHENG Fei; DUAN Bao-yan; FONT

您当前的位置：

首页 >

文章列表页 >

Electromechanical Coupling Optimization Design of Reflector Antennas including Feed Position Error

更新时间：2025-07-16

- Electromechanical Coupling Optimization Design of Reflector Antennas including Feed Position Error
- Acta Electronica Sinica Vol. 38, Issue 6, Pages: 1377-1382(2010)
- 作者机构：
  
  （西安电子科技大学机电科技研究所，）,陕西,西安,710071
- 作者简介：
- 基金信息：
- DOI：
  CLC： TN957
- Published：2010
- 稿件说明：
移动端阅览
FONT face, Verdana, LI Peng, et al. Electromechanical Coupling Optimization Design of Reflector Antennas including Feed Position Error[J]. Acta Electronica Sinica, 2010, 38(6): 1377-1382.
DOI：

FONT face, Verdana, LI Peng, et al. Electromechanical Coupling Optimization Design of Reflector Antennas including Feed Position Error[J]. Acta Electronica Sinica, 2010, 38(6): 1377-1382. DOI：

摘要

<FONT face=Verdana>针对面天线结构设计中存在的机电分离以及忽视馈源位置误差的问题，从机械电磁两场耦合的角度，将反射面天线主面误差和馈源位置误差统一到天线方向图的远场计算公式中，从而可以研究包含馈源支撑结构在内的天线结构参数对主要电性能（包括增益、副瓣、波瓣宽度、指向精度等）的影响。利用该公式建立了包含馈源支撑结构参数的天线整体机电耦合优化模型，通过某8米天线的仿真对比表明了该耦合优化模型的优点，最后将该优化模型应用于某40米大型反射面天线，取得了满意的效果。

Abstract

<FONT face=Verdana>For the problem of electromechanical separation and negligence of feed position error in reflector antenna design. From the angle of electromechanical coupling

the distortion of main reflector and position error of feed were introduced in the formula of antenna’s far field pattern. So the effect of structure parameters including feed support structure on the main electrical parameter (such as gain

side lobe

beam width

pointing accuracy) could be researched. Due to the proposed formula

a new electromechanical coupling optimization model of whole antenna including feed support structure parameters was proposed. Simulation was done via an 8m reflector antenna. Result shows that the optimization model is more efficient than tradition ones. Finally the proposed optimization model is applied to a 40m reflector antenna with good results.

关键词

Keywords

references

Views

1835

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A Method for Panel Adjustment of Large Reflector Antenna Surface and Its Application

Uplink Status Based Dynamically Optimized Channel Assignment

Effects of Periodic Geometric Error of AstroMesh Reflector Surface on Radiation Pattern and Its Elimination Method

Mechatronic Optimization Design and Analysis of Large Space Parabolic Antennas with Active Truss Support Structures

Electromechanical Coupling Modeling of Channel Capacity and Sensitivity Analysis of Element Position for Communication Antenna

Related Author

MA Bo-yuan

DUAN Bao-yan

WANG Wei

DANG An-hong

ZHU Shi-hua

CHENG Jiang

ZHANG Yi-qun

WANG Cong-si

Related Institution

School of Electromechanical Engineering, Xidian University

Dept.of Information and Communication Engineering,Xi’an Jiaotong University

Key Laboratory of Electronic Equipment Structure Design of Ministry of Education, Xidian University

Xinjiang Astronomical Observatory China Academy of Sciences Urumqi Xinjiang China

School of Electronics and Information Northwestern Polytechnical University Xi'an Shaanxi China

⁰