Study on a Novel Structure for Bulk Acoustic Wave Composite Resonator

邹英寅; 王跃林

您当前的位置：

首页 >

文章列表页 >

Study on a Novel Structure for Bulk Acoustic Wave Composite Resonator

更新时间：2025-12-08

- Study on a Novel Structure for Bulk Acoustic Wave Composite Resonator
- Acta Electronica Sinica Issue 11, (1994)
- 作者机构：
  
  浙江大学信息与电子工程系
- 作者简介：
- 基金信息：
- DOI：
  CLC： TN713.2
- Published：1994
- 稿件说明：
移动端阅览
[1]邹英寅,王跃林.体声波复合谐振器新结构的研究[J].电子学报,1994(11):9-12.

邹英寅, 王跃林. Study on a Novel Structure for Bulk Acoustic Wave Composite Resonator[J]. Acta Electronica Sinica, 1994, (11).
[1]邹英寅,王跃林.体声波复合谐振器新结构的研究[J].电子学报,1994(11):9-12. DOI：

邹英寅, 王跃林. Study on a Novel Structure for Bulk Acoustic Wave Composite Resonator[J]. Acta Electronica Sinica, 1994, (11). DOI：

摘要

本文报道了一种由氧化锌薄膜和多晶硅膜片构成的体声波复合谐振器的新结构，与传统制作在硅支撑膜片上的压电复合谐振器不同，多晶硅支撑膜采用表面微机械技术获得，因而是完全平面工艺，不需要双面光刻和背面腐蚀。采用Ｓ枪磁控反应溅射在多晶硅膜片上获得了ｃ轴取向良好的氧化锌薄膜。所得的谐振器的基波工作频率在５６０ＭＨｚ左右，而尺寸小于２５０×２５０μｍ２。

Abstract

This paper reported a novel bulk acoustic wave （BAW） microresonator structure based on piezoelectric thin films and polysilicon membrane. In contrast with conventional BAW composite resonators based on Si membrane

the poly-Si mambrane is fabricated with surface micromachining technology. The process is a completely planar approach and the double-side lithography and back-side etch are deleted. The c-axis oriented piezoelectric thin film ZnO is grown on poly-Si membrane by S-gun magnetron reactive sputtering.The size of a microresonator is less than 250×250μm2 and the resonant frequency is about 560MHz.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰