Optimal Design of Sliding Mode Control Buck Converter with Bounded Input

NI Yu; XU Jian-ping

doi:10.3969/j.issn.0372-2112.2013.03.023

您当前的位置：

首页 >

文章列表页 >

Optimal Design of Sliding Mode Control Buck Converter with Bounded Input

更新时间：2025-07-16

- Optimal Design of Sliding Mode Control Buck Converter with Bounded Input
- Acta Electronica Sinica Vol. 41, Issue 3, Pages: 555-560(2013)
- 作者机构：
  
  1. 成都信息工程学院控制工程学院,四川,成都,610225
  2. 西南交通大学电气工程学院,四川,成都,610031
  3. 成都信息工程学院控制工程学院,四川,成都,610225
  4. 西南交通大学电气工程学院,四川,成都,610031
- 作者简介：
- 基金信息：
  
  National Natural Science Foundation of China (No.51177140);Program supported by Research Fund of Chengdu University of Information Technology (No.KYTZ201126)
- DOI：10.3969/j.issn.0372-2112.2013.03.023
  CLC： TM46
- Published：2013
- 稿件说明：
移动端阅览
NI Yu, XU Jian-ping. Optimal Design of Sliding Mode Control Buck Converter with Bounded Input[J]. Acta Electronica Sinica, 2013, 41(3): 555-560.
DOI：

NI Yu, XU Jian-ping. Optimal Design of Sliding Mode Control Buck Converter with Bounded Input[J]. Acta Electronica Sinica, 2013, 41(3): 555-560. DOI： 10.3969/j.issn.0372-2112.2013.03.023.

摘要

该文针对传统滑模控制开关变换器的滑模系数选取困难的问题

分析了控制受限的传统滑模控制Buck变换器的滑动模态区与滑模系数的关系.根据电感电流为零时系统在相平面的运动规律与滑模区的关系

给出了选取最优滑模系数的方法

以确保开关变换器系统在负载变动范围内快速进入滑动模态区

避免输出电压振荡现象.可根据负载变化范围直接采用公式计算最优滑模系数.仿真研究和实验结果验证了优化设计方法的正确性和有效性.

Abstract

In order to simplify the selection of sliding coefficient of conventional sliding mode control switch converter

the relations among the sliding region

the sliding coefficient and the circuit parameters of Buck converter are analyzed and discussed.when inductor current is zero

according to the relationship between the systems trajectory and sliding region

an optimal design method for the sliding coefficient was proposed to ensure that under load variation

the switch converter enter the sliding region without the output voltage oscillation phenomena.Based on load variation scope

the optimal sliding coefficient is calculated directly.The simulation and experimental results verify the validity and feasibility of the optimal design method proposed.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Hybrid Salp Swarm Optimization Control Strategy for Microgrid Grid-Connected and Islanded Mode Switching System

Synchronization of Fully Linearizable Different Chaotic Systems

Modeling and Control of Automatic Precision Assembly Robot with Multi-information Fusion Measuring System and Control Algorithm

Trajectory Tracking Control Approach of a Car-Like Mobile Robot

Related Author

YE Shi-feng

LIAO Xiao-bing

YIN Jin-xiao

WANG Hou-neng

SHAO Hui-he

CHEN Zhi-gang

YANG Tao

SONG Wen-zhong

Related Institution

School of Electrical and Information Engineering, Wuhan Institute of Technology

Guangzhou Power Supply Bureau of Guangdong Grid Co., Ltd., Guangzhou

Department of Automation,Shanghai Jiao Tong University

Automation Research Institute,Southeast University

School of Electrical and Information Engineering, Beijing University of Civil Engineering and Architecture

⁰