Effects of Periodic Geometric Error of AstroMesh Reflector Surface on Radiation Pattern and Its Elimination Method

ZONG Ya-li; WANG Wei; WANG Cong-si; ZHANG Yi-qun

doi:10.3969/j.issn.0372-2112.2014.05.020

您当前的位置：

首页 >

文章列表页 >

Effects of Periodic Geometric Error of AstroMesh Reflector Surface on Radiation Pattern and Its Elimination Method

更新时间：2025-07-16

- Effects of Periodic Geometric Error of AstroMesh Reflector Surface on Radiation Pattern and Its Elimination Method
- Acta Electronica Sinica Vol. 42, Issue 5, Pages: 963-970(2014)
- 作者机构：
  
  西安电子科技大学电子装备结构设计教育部重点实验室,陕西,西安,710071
- 作者简介：
- 基金信息：
  
  National Natural Science Foundation of China (No.51205301, No.51035006)
- DOI：10.3969/j.issn.0372-2112.2014.05.020
  CLC： V443.4
- Published：2014
- 稿件说明：
移动端阅览
ZONG Ya-li, WANG Wei, WANG Cong-si, et al. Effects of Periodic Geometric Error of AstroMesh Reflector Surface on Radiation Pattern and Its Elimination Method[J]. Acta Electronica Sinica, 2014, 42(5): 963-970.
DOI：

ZONG Ya-li, WANG Wei, WANG Cong-si, et al. Effects of Periodic Geometric Error of AstroMesh Reflector Surface on Radiation Pattern and Its Elimination Method[J]. Acta Electronica Sinica, 2014, 42(5): 963-970. DOI： 10.3969/j.issn.0372-2112.2014.05.020.

摘要

环形桁架可展开天线的型面由一系列面片拼合而成，其电性能由这些面片的大小和形状决定.本文针对环形可展开天线型面周期性几何逼近误差导致天线远场方向图存在电平较高的栅瓣的问题，提出了通过破坏误差周期性来消除其对电性能影响的方法.首先，分析了型面几何逼近误差的周期性及其对天线电性能的影响；其次，提出两种消除型面几何逼近误差周期性的方法，一是在径向引入破坏因子，二是改变型面环向轮廓形状；最后，建立优化模型，求出同时满足用户电性能和结构要求的网面分环数和破坏因子.数值仿真表明本文提出的型面优化设计方法既能在保证天线增益的条件下消除栅瓣，又不导致天线结构过于复杂.

Abstract

Since curved antenna surface is approximated by flat facets

the electromagnetic (EM) properties of an AstroMesh reflector are determined by the size and shape of the facets.A period disturbance technique is presented to decrease the grating lobe level generated by periodic geometric approximation error.At first

the periodicity of the error and the effects of the periodicity on EM properties are studied.Secondly

two strategies are developed to disturb the periodicity of the error

one is to introduce radial direction disturbance parameters

and the other is to change the shape of the rings.At last

an optimization model is built to obtain fewer segments

proper disturbance parameters and better EM performance.Numerical examples show that the presened method can eliminate the grating lobes level without decreasing the gain and increasing the structural complexity of AstroMesh antennas.

关键词

Keywords

references

Views

1815

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Electromechanical Coupling Optimization Design of Reflector Antennas including Feed Position Error

Uplink Status Based Dynamically Optimized Channel Assignment

Mechatronic Optimization Design and Analysis of Large Space Parabolic Antennas with Active Truss Support Structures

Related Author

FONT face

Verdana

LI Peng

ZHENG Fei

DUAN Bao-yan

FONT

CHENG Jiang

ZHU Shi-hua

Related Institution

(Research Institute on Mechatronics, Xidian University, Xi’an 710071, Chian)

Dept.of Information and Communication Engineering,Xi’an Jiaotong University

School of Electromechanical Engineering, Xidian University

⁰