Analysis of Failure Modes and Life of Solder Joints Under Coupling of Vibration and Thermal Loads

TANG Wei; JING Bo; HUANG Yi-feng; SHENG Zeng-jin; HU Jia-xing

doi:10.3969/j.issn.0372-2112.2017.07.010

您当前的位置：

首页 >

文章列表页 >

Analysis of Failure Modes and Life of Solder Joints Under Coupling of Vibration and Thermal Loads

更新时间：2025-07-16

- Analysis of Failure Modes and Life of Solder Joints Under Coupling of Vibration and Thermal Loads
- Acta Electronica Sinica Vol. 45, Issue 7, Pages: 1613-1619(2017)
- 作者机构：
  
  空军工程大学航空航天工程学院,陕西,西安,710038
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0372-2112.2017.07.010
  CLC： TN406
- Published Online：25 July 2017，
  
  Published：2017
- 稿件说明：
移动端阅览
TANG Wei, JING Bo, HUANG Yi-feng, et al. Analysis of Failure Modes and Life of Solder Joints Under Coupling of Vibration and Thermal Loads[J]. Acta Electronica Sinica, 2017, 45(7): 1613-1619.
DOI：

TANG Wei, JING Bo, HUANG Yi-feng, et al. Analysis of Failure Modes and Life of Solder Joints Under Coupling of Vibration and Thermal Loads[J]. Acta Electronica Sinica, 2017, 45(7): 1613-1619. DOI： 10.3969/j.issn.0372-2112.2017.07.010.

摘要

基于正交试验法研究不同温度与振动耦合条件下的板级焊点失效行为与模式，采用L

（34）混合水平正交表设计了不同温度（T）、加速度功率谱密度（PSD）与频率（V）条件下的加速寿命试验，结果表明三者对焊点可靠性影响程度为TPSDV，且温度是影响焊点失效模式的主要因素，随温度的升高，焊点裂纹逐渐从近封装侧的界面金属化合物（IMC）层向钎体内部扩展，焊点失效模式从脆性断裂向韧性断裂演化.基于焊点失效数据分析，发现焊点疲劳寿命对数值与PCB板背侧最大应变范围存在关联关系，并采用多项式拟合的方法建立了焊点疲劳寿命模型，拟合结果显示，该模型能较好的评估温度与振动耦合条件下的焊点寿命，预测精度较高.

Abstract

The failure behavior and modes of board level solder joints under coupling of vibration and thermal loads were studied based on the orthogonal experiment design method.The accelerated life tests with different temperature (T)

power spectral density (PSD) and frequency (V) were conducted by using a L

(34) mixed-level orthogonal array.The results show that the degree of influence that the three factors have on the reliability of solder joints is TPSDV.The temperature is the main factor that can affect the failure modes of solder joints significantly.The crack initiates in the intermetalic compound (IMC) and propagates into the bulk solder gradually as the temperatu

re rise.The failure mode evolves from the brittle fracture to ductile fracture.Based on the analysis of the failure data

a fatigue life model of solder joint was developed by using the polynomial fitting method

according to the relationship between the logarithmic fatigue life value and the strain range of the back side of the printed circuit board.The fitting results indicate that the model can evaluate the fatigue life of solder joints under the coupling of the vibration and thermal loads accurately.

关键词

Keywords

references

Views

452

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Electromigration in Micro-Interconnections of Electronic Packaging

Study on the Relationships between Solder Joint Process Parameters and Reliability of Plastic Ball Grid Array Component Based on the Orthogonal Experiment Design

Related Author

YIN Li-meng

ZHANG Xin-ping

HUANG Chun-yue

ZHOU De-jian

WU Zhao-hua

Related Institution

School of Mechanical Science and Engineering,South China University of Technology

School of Electro-Mechanical Engineering,Xidian University

Dept.of Electronic Machinery and Transportation Engineering,Guilin University of Electronic Technology

School of Electro-Mechanical EngineeringXidian UniversityXi'anShaanxi 710071China

Dept.of Electronic Machinery and Transportation EngineeringGuilin University of Electronic TechnologyGuilinGuangxi 541004China

⁰