Isogeometric Analysis for the Two-Dimensional Electrostatic Field Problem Based on the NURBS Patch Splicing Technique

WANG Feng; ZHOU Yi-hong; LIN Gao; ZHAO Chun-ju; HE Wei-ping

doi:10.3969/j.issn.0372-2112.2018.02.027

您当前的位置：

首页 >

文章列表页 >

Isogeometric Analysis for the Two-Dimensional Electrostatic Field Problem Based on the NURBS Patch Splicing Technique

更新时间：2025-07-16

- Isogeometric Analysis for the Two-Dimensional Electrostatic Field Problem Based on the NURBS Patch Splicing Technique
- Acta Electronica Sinica Vol. 46, Issue 2, Pages: 456-463(2018)
- 作者机构：
  
  1. 三峡大学水利与环境学院,湖北,宜昌,443002
  2. 三峡大学湖北省水电工程施工与管理重点实验室,湖北,宜昌,443002
  3. 大连理工大学水利工程学院,辽宁,大连,116024
- 作者简介：
- 基金信息：
  
  National Natural Science Foundation of China (No.51479103);Youth Fund of National Natural Science Foundation of China (No.51109134);China Postdoctoral Science Foundation (No.2013T60283);Open Fund for Hubei Key Laboratory of Hydropower Engineering Construction and Managemen (No.2016KSD12)
- DOI：10.3969/j.issn.0372-2112.2018.02.027
  CLC： TM151
- Published Online：25 February 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
WANG Feng, ZHOU Yi-hong, LIN Gao, et al. Isogeometric Analysis for the Two-Dimensional Electrostatic Field Problem Based on the NURBS Patch Splicing Technique[J]. Acta Electronica Sinica, 2018, 46(2): 456-463.
DOI：

WANG Feng, ZHOU Yi-hong, LIN Gao, et al. Isogeometric Analysis for the Two-Dimensional Electrostatic Field Problem Based on the NURBS Patch Splicing Technique[J]. Acta Electronica Sinica, 2018, 46(2): 456-463. DOI： 10.3969/j.issn.0372-2112.2018.02.027.

摘要

等几何分析方法在求解静电场问题时，实现了几何模型和计算模型的统一以及自适应网格划分过程，然而受制于单个NURBS曲面片拓扑的局限性，单片等几何分析方法难以处理含角点非凸几何域静电场及多媒质静电场问题.本文基于面片拼接技术，将单片等几何分析方法扩展到多片，并用来求解二维含角点非凸几何域静电场及多媒质静电场问题，NURBS曲面片拼接处的控制点和网格细分前后要求必须匹配.由于NURBS基函数不满足插值性，在非齐次Dirichlet边界条件的处理上本文采用Lagrange乘子法进行处理.数值算例表明：修正后的多面片等几何分析方法可以很好地处理二维含角点非凸几何域静电场及多媒质静电场问题，且相比传统的有限元法，该方法具有自由度消耗小、精度高、收敛速度快等优点.

Abstract

Isogeometric analysis (IGA) based on the non-uniform rational B-splines (NURBS) realizes the unification of the geometric model

the computational model and adaptive mesh generation process in solving electrostatic problems.However

IGA based on one single NURBS patch is difficult to deal with the non-convex electrostatic field with corners and inhomogeneous electrostatic field because of limitation of the NURBS patch topology. In this paper

IGA based on the patch splicing is used to solve two-dimensional electrostatic problems of this kind while IGA extends from one single NURBS patch to multipatches. The control points and meshes of different patches must coincide on the interface

even after refinement. Due to lack of interpolation properties for the NURBS basis functions

Lagrange multiplier method is adopted to deal with non-homogeneous Dirichlet boundary conditions. Numerical examples are presented to show that modified multi-patch IGA can solve two-dimensional electrostatic problems of this kind well and possess the advantages of better convergence on a per-degree-of-freedom and high accuracy.

关键词

Keywords

references

Views

224

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Isogeometric Analysis for the Waveguide Eigenvalue Problem Based on the NURBS Patch Splicing Technique

Calculation of the Double Reflection Between Objects Modeled by NURBS Surfaces

Study on the Creeping Ray-Tracing Algorithm of NURBS-UTD Method with the Source on Surface

Isogeometric Analysis with Trimming Technique for the Waveguide Eigenvalue Problem

Research of Guidance Method Based on the Electrostatic Field of Target for Underwater Weapon

Related Author

LI Jian-bo

LIU Jun

LIN Gao

WANG Feng

SHI Xiao-wei

WANG Meng

CHEN Xiao-jie

ZHANG Yu

Related Institution

State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering Nanjing Hydraulic Research Institute Nanjing Jiangsu China

School of Hydraulic Engineering Dalian University of Technology Dalian Liaoning China

State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Nanjing Hydraulic Research Institute

School of Hydraulic Engineering, Dalian University of Technology

Institute of China Ship ResearchBeijing 100192China

⁰