Microwave Power Measurement Method Based on Quadrature Directional Couplers

doi:10.3969/j.issn.0372-2112.2018.05.030

您当前的位置：

首页 >

文章列表页 >

Microwave Power Measurement Method Based on Quadrature Directional Couplers

更新时间：2025-07-08

- Microwave Power Measurement Method Based on Quadrature Directional Couplers
- Acta Electronica Sinica Vol. 46, Issue 5, Pages: 1222-1226(2018)
- 作者机构：
  
  中国科学技术大学国家同步辐射实验室,安徽,合肥,230000
- 作者简介：
- 基金信息：
  
  National Key Scientific Research Instrument and Equipment Development Project (No.21327901)
- DOI：10.3969/j.issn.0372-2112.2018.05.030
  CLC： TL503.2
- Published Online：25 May 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
Microwave Power Measurement Method Based on Quadrature Directional Couplers[J]. Acta Electronica Sinica, 2018, 46(5): 1222-1226.
DOI：

Microwave Power Measurement Method Based on Quadrature Directional Couplers[J]. Acta Electronica Sinica, 2018, 46(5): 1222-1226. DOI： 10.3969/j.issn.0372-2112.2018.05.030.

摘要

定向耦合器广泛应用于微波系统的功率测量.但定向耦合器的方向隔离度有限，两个方向的耦合输出信号存在一定程度地串扰，影响功率测量的准确性.为了解决这一问题，本文提出一种正交耦合测量方法.该方法采用一对相位差为90的定向耦合器同时测量功率，通过对测量结果的计算处理，可消除方向串扰的影响.推导了正反向传输功率与正交耦合器组合功率测量值的关系，分析了正交偏差所产生的误差.为了确定耦合器的正交状态，提出了一种准确测量两个定向耦合器之间相位差的方法.实测表明正交耦合方法可有效提高功率和驻波比测量的准确性.

Abstract

Directional coupler is commonly used in the microwave system to measure the forward and backward power.Due to the limited directional isolation of the coupler

the crosstalk existing between the bi-directional coupling output signals will influence the accuracy of power measurement.The quadrature directional coupling method is developed to solve this problem.A pair of directional couplers with a phase difference of 90 are used to measure the coupling output power simultaneously

and the influence of crosstalk can be eliminated effectively by processing the measurement data.The relationship between forward and backward power and the outputs of quadrature couplers is derived

and the error due to the quadrature deviation is analyzed.In order to determine the quadrature situation

the method to measure the phase difference between two couplers is proposed.The experiment shows that the quadrature directional method can improve the accuracy of power and VSWR measurement effectively.

关键词

Keywords

references

Views

207

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Millimeter-Wave Broadband Directional Coupler Based on Gap Waveguide

Optimum Design on Compact Photonic Crystal Waveguide Directional Coupler Based on Adiabatic Coupling

Stability Analysis and Design of T/R Module in Active Phased Array Radar

Design of a Dual-Polarized Linear Microstrip Antenna Array with High Isolation

Analysis of the Directional Coupler Based on the GaAs/GaAlAs Optical Strip Waveguide

Related Author

SHI Yong-rong

WANG Hui

NI Xiao-yu

FENG Wen-jie

SHEN Rui-liang

SUN Xiao-han

BAI Ning-feng

YU Hong-biao

Related Institution

Guangdong Provincial Key Laboratory of Millimeter-Wave and Terahertz， South China University of Technology

Department of Communication Engineering， Nanjing University of Science and Technology

Ministry of Industry and Information Technology， Nanjing University of Aeronautics and Astronautics

Research Center for Electronic Device and System Reliability,Southeast University

National Key Laboratory of Antenna and Microwave TechnologyNanjingJiangsu 210013China

⁰