A Method on Peak-to-Average Power Ratio Reduction

LIU Lu; ZHAO Guo-qing

doi:10.3969/j.issn.0372-2112.2018.10.018

您当前的位置：

首页 >

文章列表页 >

A Method on Peak-to-Average Power Ratio Reduction

更新时间：2025-07-16

- A Method on Peak-to-Average Power Ratio Reduction
- Acta Electronica Sinica Vol. 46, Issue 10, Pages: 2443-2449(2018)
- 作者机构：
  
  1. 西安电子科技大学电子工程学院,陕西,西安,710071
  2. 西安邮电大学通信与信息工程学院,陕西,西安,710121
  3. 西安电子科技大学电子工程学院,陕西,西安,710071
  4. 西安邮电大学通信与信息工程学院,陕西,西安,710121
- 作者简介：
- 基金信息：
  
  Science and Technology Research and Development Plan of Shaanxi Province (No.2016YFJH2-08)
- DOI：10.3969/j.issn.0372-2112.2018.10.018
  CLC： TN951
- Published：2018
- 稿件说明：
移动端阅览
LIU Lu, ZHAO Guo-qing. A Method on Peak-to-Average Power Ratio Reduction[J]. Acta Electronica Sinica, 2018, 46(10): 2443-2449.
DOI：

LIU Lu, ZHAO Guo-qing. A Method on Peak-to-Average Power Ratio Reduction[J]. Acta Electronica Sinica, 2018, 46(10): 2443-2449. DOI： 10.3969/j.issn.0372-2112.2018.10.018.

摘要

数字波束形成中，高的峰均比会使功率放大器工作在非线性区域，造成发射信号的失真.针对现阶段的信号预畸变抑制峰均比的方法会造成严重的带内干扰和带外噪声等问题，本文提出了一种基于保角压缩的峰均比抑制的方法.该方法首先构造稀疏阵列流型，压缩波束形成过程中的数据量，然后利用保角解析变换的性质，在信号的解析域进行限幅滤波，在信号通过功率放大器后，重构信号.本方法对信号进行了压缩采样，降低了运算的复杂度；同时，在一定程度上抑制了传统限幅滤波算法所造成的带内干扰和带外噪声，提高了信号的抗干扰能力.实验仿真验证了本方法的可行性.

Abstract

The purpose of the present study is to reduce the high Peak-to-Average Power Ratio (PAPR) in Digital Beam-Forming (DBF). We propose a method based on conformal transformation and compressive sensing (CS). We make a sparse array manifold

following that sampling the DBF signal compressively. Then we clip and filter the sampled signal in the analytic domain which is gotten through the conformal transformation. Reconstructing the previous signal could be accomplished through CS. Compared with the former ways

the test experiment results show that by the presented method

the operation speed is faster; the out-band noise and the in-band jamming are much lower.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Analysis of the electrostatic capacitance of an integrated capacitive sensor’s external electrons

A CAD-Oriented Model for Asymmetric Ally Shielded Multilayered CPW

The Characteristic Impedance of Rectangular-Coaxial-Cone Transmission Line

A New Method of Calculating the Characteristic Impedance of Rectangular Line with Circular Inner Conductor

Properties of Slotted Coaxial Line with Elliptic Cross-Section

Related Author

FONT face

Verdana

Wang Yang

Chen Jun-Ning

Ke Dao-Ming

FONT

FANG Shao-jun

WANG Bai-suo

Related Institution

Information College,Dalian Maritime University

Dept. of Radio Electronics Sichuan University, Chengdu 610064) Lin Weigan

电子科技大学成都 610064

成都 610054

Radio and Electronic Dept. .Zhongshan University

⁰