1. 首都师范大学信息工程学院,北京,100048
2. 北京数学与信息交叉科学 2011协同创新中心,北京,100048
3. 山东航天电子技术研究所,山东,烟台,264003
4. 北京市高可靠嵌入式系统工程技术研究中心,北京,100048
5. 首都师范大学信息工程学院,北京,100048
6. 北京数学与信息交叉科学 2011协同创新中心,北京,100048
7. 山东航天电子技术研究所,山东,烟台,264003
8. 北京市高可靠嵌入式系统工程技术研究中心,北京,100048
纸质出版:2015
移动端阅览
张伟功, 周继芹, 李杰, 等. UM-BUS总线及接入式体系结构[J]. 电子学报, 2015,43(9):1776-1785.
ZHANG Wei-gong, ZHOU Ji-qin, LI Jie, et al. UM-BUS and a Plug and Play Architecture[J]. Acta Electronica Sinica, 2015, 43(9): 1776-1785.
张伟功, 周继芹, 李杰, 等. UM-BUS总线及接入式体系结构[J]. 电子学报, 2015,43(9):1776-1785. DOI: 10.3969/j.issn.0372-2112.2015.09.015.
ZHANG Wei-gong, ZHOU Ji-qin, LI Jie, et al. UM-BUS and a Plug and Play Architecture[J]. Acta Electronica Sinica, 2015, 43(9): 1776-1785. DOI: 10.3969/j.issn.0372-2112.2015.09.015.
本文针对航天航空等领域综合电子系统在小型化、一体化设计及信息综合利用等方面的需求
提出一种可动态重构的高速串行通信总线(UM-BUS)
采用
N
(32)通道并发传输
通信速率可达6.4Gbps
采用总线型拓扑结构
最大通信距离40m
支持最多30个节点直接互连
具有远程存储访问能力
采用命令应答式协议提供QoS与实时性保证;通过并发通道相互冗余与动态重构
在允许50%性能降低的情况下
能够对
N
/2通道故障动态容错.在UM-BUS总线基础上
本文提出一种新型的接入式体系结构模型
在不改变系统逻辑结构的前提下
能够突破机箱结构限制
将逻辑功能分散嵌入到控制测量对象内部
实现功能模块接入即用
使得综合电子系统一体化设计成为可能.
According to the demands of miniaturization
integrated design and comprehensive information utilization for integrated electronic system in aviation and aerospace field
this paper presents the UM-BUS.It is a high-speed
dynamic reconfigurable serial bus with
N
(32) concurrent lanes of mutual redundant structure available
and the maximum communication rate of 6.4Gbps.UM-BUS is formed by general bus-topology structure where up to 30 nodes can be connected directly to provide the capability of remote memory accessing with maximum communication distance of up to 40m.UM-BUS uses command/response protocol to attain QoS and real-time guarantee.In the case of allowing 50% reduced performance
any fault in
N
/2 lanes can be tolerant by reconfiguring the mutual redundant concurrent lanes automatically.On the basis of UM-BUS
this paper put forward a new architecture of embedded systems.This access type architecture is geared to the needs of embedded system control and measurement applications.It does not change the logic architecture of embedded system
but this access architecture can break the structural constraints of embedded systems' chassis.It can accomplish a plug and play of the functional module by means of dispersing the logic functions to the interior of the control measurement object.By using this architecture
the integration designing of integrated electronic systems is possible to complete.
0
浏览量
2
下载量
2
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621