辽宁石油化工大学机械学院,辽宁,抚顺,114001
纸质出版:2016
移动端阅览
吴敏, 吕柏林. 纳米Sn-Ag钎料合金熔化温度及形成焓的研究[J]. 电子学报, 2016,44(1):222-226.
WU Min, LV Bai-lin. An Investigation on the Melting Temperature and the Formation Enthalpy of Nanocrystallines Sn-Ag Solder Alloy[J]. Acta Electronica Sinica, 2016, 44(1): 222-226.
吴敏, 吕柏林. 纳米Sn-Ag钎料合金熔化温度及形成焓的研究[J]. 电子学报, 2016,44(1):222-226. DOI: 10.3969/j.issn.0372-2112.2016.01.033.
WU Min, LV Bai-lin. An Investigation on the Melting Temperature and the Formation Enthalpy of Nanocrystallines Sn-Ag Solder Alloy[J]. Acta Electronica Sinica, 2016, 44(1): 222-226. DOI: 10.3969/j.issn.0372-2112.2016.01.033.
考虑表面效应
基于Lindemann熔化准则
利用Miedema 模型对Sn-Ag纳米钎料合金的熔化温度及形成焓进行计算.Sn-Ag纳米合金微粒的熔化温度及形成焓均依赖于尺寸和组元成分;对于Sn3.5Ag纳米钎料合金
当微粒尺寸大小为5nm时
其熔化温度下降约为7%;而合金形成焓随晶粒粒径的减小而增加
合金稳定性降低;对于Sn3.5Ag钎料合金
当粒径尺寸为0.1m时
合金形成焓完全为正值
对Sn-Ag钎料合金组织形成存在产生很大影响.
Considering the surface effect
the melting temperature and the formation enthalpy of Sn-Ag nanoscale solder alloy were calculated by Miedema model using Lindemann melting criterion.The results show that the melting temperature and the formation enthalpy of Sn-Ag nanoscale solder alloy are dependent on the grain size and component composition.When the particle size is 5nm
the melting temperature decreased by about 7% for Sn3.5Ag nanoscale solder alloy;while the formation enthalpy of the alloy increases with the decrease of particle size
and the alloy stability decreases accordingly.Meanwhile
the formation enthalpy of the Sn3.5Ag solder alloy is completely positive when the grain size is 0.1 m
which can create significant influence on the microstructure formation of the Sn-Ag solder alloy.
0
浏览量
974
下载量
1
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621