电子学报 ›› 2015, Vol. 43 ›› Issue (7): 1418-1424.DOI: 10.3969/j.issn.0372-2112.2015.07.026

• 科研通信 • 上一篇    下一篇

基于改进的局部特征尺度分解和归一化正交的时频分析方法

郑近德, 程军圣, 曾鸣   

  1. 湖南大学汽车车身先进设计制造国家重点实验室, 湖南长沙 410082
  • 收稿日期:2013-11-14 修回日期:2014-01-11 出版日期:2015-07-25
    • 通讯作者:
    • 郑近德
    • 作者简介:
    • 程军圣 男,1968年出生,博士,湖南大学教授,博士生导师.从事机械故障诊断、动态信号分析与处理等方面的研究. Email:chengjunsheng@hnu.edu.cn
    • 基金资助:
    • 国家自然科学基金 (No.51075131); 湖南省自然科学基金 (No.11JJ2026); 湖南省研究生科研创新项目 (No.CX2013B144); 湖南省机械设备健康维护重点实验室开放基金 (No.201202)

A New Time-Frequency Analysis Method Based on Improved Local Characteristic-Scale Decomposition and Normalized Quadrature

ZHENG Jin-de, CHENG Jun-sheng, ZENG Ming   

  1. State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha, Hunan 410082, China
  • Received:2013-11-14 Revised:2014-01-11 Online:2015-07-25 Published:2015-07-25
    • Supported by:
    • National Natural Science Foundation of China (No.51075131); Natural Science Foundation of Hunan Province,  China (No.11JJ2026); Postgraguate Technology Innovation Program of Hunan Province (No.CX2013B144); Open Foundation of Key Laboratory of Mechanical Equipment Maintenance of Hunan Province (No.201202)

摘要:

针对希尔伯特-黄变换(Hilbert-Huang Transform,HHT)中经验模态分解(Empirical Mode Decomposition,EMD)和希尔伯特变换(Hilbert Transform,HT)的不足,提出了一种基于改进的局部特征尺度分解(Improved Local Characteristic-scale Decomposition,ILCD)和归一化正交(Normalized Quadrature,NQ)的时频分析方法.ILCD克服了LCD的固有缺陷,在精确性和正交性等方面要优于EMD和LCD方法.同时为了克服HT的不足,提出了一种基于经验调幅调频分解标准化估计瞬时频率的归一化正交(Normalized Quadrature,NQ)方法.通过仿真信号将EMD,LCD与ILCD进行对比,同时将标准希尔伯特变换,直接正交法与NQ进行对比,结果表明了论文方法的有效性.转子碰摩故障数据分析结果进一步验证了论文方法的有效性和优越性.

关键词: Hilbert-Huang变换, 经验模态分解, 局部特征尺度分解, 时频分析, 转子碰摩

Abstract:

Aiming to resolve the problems of Hilbert-Huang transform(HHT),which contains empirical mode decomposition(EMD)and Hilbert transform(HT),a new time-frequency analysis method based on improved local characteristic-scale decomposition(ILCD)and normalized quadrature(NQ)was proposed in this paper.ILCD solved the intrinsic problem of LCD and outperformed the EMD and LCD in accuracy and orthogonality.In addition,the NQ method for estimating instantaneous frequency was proposed based on the empirical AM-FM decomposition.By comparing ILCD with EMD and LCD,and comparing NQ with normalized HT and direct quadrature(DQ),the analysis results indicate that the proposed method is predominant.Finally,the proposed method was applied to fault diagnosis of rotor local rubbing and the conclusions verified its effectiveness and excellence.

Key words: Hilbert-Huang transform(HHT), empirical mode decomposition(EMD), local characteristic-scale decomposition(LCD), time-frequency analysis, rotor rubbing

中图分类号: