基于QCA的双边沿JK触发器的实现

doi:10.3969/j.issn.0372-2112.2017.08.034

电子学报 ›› 2017, Vol. 45 ›› Issue (8): 2044-2048.DOI: 10.3969/j.issn.0372-2112.2017.08.034

基于QCA的双边沿JK触发器的实现

杜化鲲, 吕洪君, 黄程, 张永强, 解光军

合肥工业大学电子科学与应用物理学院, 安徽合肥 230009

收稿日期:2015-09-17 修回日期:2016-12-15 出版日期:2017-08-25
- 作者简介:
- 杜化鲲,男,1992年生于安徽六安,现为合肥工业大学物理电子学硕士生,研究方向为集成电路设计与测试.E-mail:duhuakun666@163.com;吕洪君,男,1958年生于安徽宿州,硕士,现为合肥工业大学副教授,研究方向为纳米电路与系统、量子信息与量子电路设计.E-mail:lvhongjun1958@sina.com
- 基金资助:
- 国家自然科学基金 (No.61271122）

Implementation of the Dual-Edge Triggered JK Flip-Flop Based on QCA

DU Hua-kun, LÜ Hong-jun, HUANG Cheng, ZHANG Yong-qiang, XIE Guang-jun

School of Electronic Science and Applied Physics, Hefei University of Technology, Hefei, Anhui 230009, China

Received:2015-09-17 Revised:2016-12-15 Online:2017-08-25 Published:2017-08-25

摘要/Abstract

摘要： 量子元胞自动机（Quantum-dot Cellular Automata，QCA）是一种有望替代传统半导体晶体管的新型纳米器件.本文提出了一种改进的双边沿触发结构及其相应的JK触发器电路，用概率转移矩阵（Probabilistic Transfer Matrix，PTM）分析该触发结构，结果表明该结构较以往的可靠性更高.同时利用模块垂直堆叠方法来优化了JK触发器电路，新结构电路较之前的电路元胞数和整体面积均有所减少.

关键词: 量子元胞自动机, JK触发器, 双边沿触发结构, 概率转移矩阵

Abstract: Quantum-dot cellular automata (QCA) is an emerging nano-device that can be considered as a promising alternative for semiconductor transistor.An improved dual-edge triggered structure and JK flip-flop are proposed.The reliability of the dual-edge triggered structure is higher than that of previous designs through the probabilistic transfer matrix.Furthermore,compared to the previous designs of JK flip-flop,the dual-edge triggered JK flip-flop based on the vertically-stacked block has less cell number and smaller area.

Key words: quantum-dot cellular automata, JK flip-flop, dual-edge triggered structure, probabilistic transfer matrix

中图分类号:

TN402

杜化鲲, 吕洪君, 黄程, 张永强, 解光军. 基于QCA的双边沿JK触发器的实现[J]. 电子学报, 2017, 45(8): 2044-2048.

DU Hua-kun, LÜ Hong-jun, HUANG Cheng, ZHANG Yong-qiang, XIE Guang-jun. Implementation of the Dual-Edge Triggered JK Flip-Flop Based on QCA[J]. Acta Electronica Sinica, 2017, 45(8): 2044-2048.

参考文献

[1] C S Lent,P D Tougaw,W Porod,et al.Quantum-dot cellular automata[J].Nanotechnology,1993,4(1):49-57.
[2] 王友仁,黄媛媛,冯冉,等.基于矩阵编码的量子可逆逻辑电路进化设计方法[J].电子学报,2011,39(11):2576-2582. Wang You-ren,Huang Yuang-yuang,Feng Ran,et al.Evolutiongary design technology of quantum reversible logic circuit based on matrix coding[J].Acta Electronica Sinica,2011,39(11):2576-2582.(in Chinese)
[3] 夏银水,裘科名.基于量子细胞自动机的数值比较器设计[J].电子与信息学报,2009,31(6):1517-1520. Xia Yin-shui,Qiu Ke-ming.Number comparator based on quantum-dot cellular automata[J].Journal of Electronics & Information Technology,2009,31(6):1517-1520.(in Chinese)
[4] Chaudhary A,Chen D Z,Hu X S,et al.Fabric table interconnect and molecular QCA circuits[J].IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems,2007,26(11):1987-1991.
[5] Saifee H,Mehrotra A,Sarma R.QCA based sequential and combinational circuit design and importance of parasitic components[A].2014 International Conference on Signal Propagation and Computer Technology[C].Ajmer,India:IEEE,2014.541-546.
[6] Yang Xiaokuo,Cai Li,Zhao Xiaohui,et al.Design and simulation of sequential circuits in quantum-dot cellular automata:Falling edge-triggered flip-flop and counter study[J].Microelectronics Journal,2010,41(1):56-63.
[7] Victor P,Nelson H,Nagle T,Bill D,et al.Digital Logic Circuit Analysis & Design[M].Prentice-Hall,1995.106-120.
[8] Xiao Linrong,Chen Xiexiong,Ying Shiyan.Design of dual-edge triggered flip-flops based on quantum-dot cellular automata[J].Journal of Zhejiang University-SCIENCE C (Computers & Electronics),2012,13(5):385-392.
[9] Wu Chubin,Xie Guangjun,Xiang Yunlong,et al.Design and simulation of dual-edge triggered sequential circuits in quantum-dot cellular automata[J].Journal of Computational and Theoretical Nanoscience,2014,11(7):1620-1626.
[10] Yang X,Cai L,Zhao X.Low power dual-edge triggered flip-flop structure in quantum dot cellular automata[J].Electronics Letters,2010,46(12):825-835.
[11] Walus K,Dysart T J,Jullien G A,et al.QCADesigner:A rapid design and simulation tool for quantum-dot cellular automata[J].IEEE Trans on Nanotechnology,2004,3(1):16-31.
[12] 欧阳城添,江建慧.基于概率转移矩阵的时序电路可靠度估计方法[J].电子学报,2013,41(1):171-177. Ou Yang Cheng-tian,Jiang Jian-hui.Reliability estimation of sequential circuit based on probabilistic transfer matrices[J].Acta Electronica Sinica,2013,41(1):171-177.(in Chinese)
[13] Prameela K N,Gurumurthy K S.QCA system design using blocks with vertically stacked active elements[A].20142nd International Conference on Devices,Circuits and Systems (ICDCS)[C].Combiatore,India:IEEE,2014.1-6.

基于QCA的双边沿JK触发器的实现

Implementation of the Dual-Edge Triggered JK Flip-Flop Based on QCA

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics

[1]	邓飞飞, 解光军, 王晓旸, 程心, 张永强. 量子元胞自动机共面五输入择多门结构的分析与设计[J]. 电子学报, 2020, 48(5): 861-869.
[2]	李俊文, 夏银水. 基于QCA的五输入Majority门设计及应用[J]. 电子学报, 2019, 47(2): 404-409.
[3]	孙梦博, 吕洪君, 张永强, 解光军. 量子元胞自动机全加器的性能分析与设计[J]. 电子学报, 2018, 46(7): 1774-1780.
[4]	欧阳城添, 江建慧, 王曦. 触发器可靠度计算的F-PTM方法[J]. 电子学报, 2016, 44(9): 2219-2226.
[5]	刘帅, 解光军, 张永强, 项云龙, 吕洪君. 基于改进五输入择多门的QCA全加器设计及应用[J]. 电子学报, 2015, 43(2): 387-392.
[6]	杨晓阔, 蔡理, 张明亮, 段小虎, 王卓. 基于形状工程的可靠磁性逻辑器件和触发器实现[J]. 电子学报, 2013, 41(8): 1609-1614.
[7]	欧阳城添, 江建慧. 基于概率转移矩阵的时序电路可靠度估计方法[J]. 电子学报, 2013, 41(1): 171-177.
[8]	王真;江建慧. 基于概率转移矩阵的串行电路可靠度计算方法[J]. 电子学报, 2009, 37(2): 241-247.